C.M.P. Group > 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Pump
Metering Pump > PZ

Untitled Document
PZ Series

Wolrd's first* wide voltage range power supply!
PZ Series with simple mechanism is available!

Since the world's first* wide voltage range power supply (AC90V to AC264V) is applied, you can use these hightly efficient compact metering pumps without worrying about the voltage in the environment where the power voltage may be unstable such as many countries in the world.
* As a metering pump as of April 1, 1998.

<Advantages>
Wide voltage range power supply
No need to change power supplies to match your source voltage. The power supply operates at 50/60 Hz from AC90V to AC264V (patent pending)
  • Outdoor specifications
    Equivalent to IEC specification; IP65.
    Dust-proof, jet stream-proof structure.
  • Air release
    The standard air release feature and a pump head with improved volumetric efficiency ensure safe operations even during very low flow rate injection. (Excluding 32,52)
  • Adjusting dial
    Manual adjustment from 15 to 300 pulses per minute.
  • Simple structure
    Reduced number of parts allows easy maintenance.

<Applications>
  • Chlorine sterilization for small-scale water-supply system, food plants, buildings and swiming pools
  • Injection of chemicals to boilers
  • Chemical injection in the field of physics and chemistry plus medical cure
  • Very low flow rate at a high pressure injection of various other liquids


Ο Specification:PZ w/Relief Valve

Model
Specification
30R 60R 100R
VTCE VTCF FTCE FTCF FTCT VTCET
for injection of
boiler chemicals
VTCE VTCF FTCE FTCF FTCT VTCE VTCF FTCE FTCF FTCT
Max. discharge volume *1 mL/min 30 28 60 100
L/h 1.8 1.68 3.6 6.0
Max. discharge pressure *1 MPa 0.7 *2 1.5 0.7 *3 0.4
Stroke speed 15 to 300 strokes/min (dial setting)
Stroke length Fixed at 1.0 mm
Connection
(hose/tube: I.D × O.D)
Discharge side 4 × 9
(PVC braided hose)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(FEP)
1/4 × 3/8
(FEP)
4 × 6
(nylon tube)
6 × 11
(PVC braided hose)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(FEP)
1/4 × 3/8
(FEP)
6 × 11
(PVC braided hose)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(FEP)
1/4 × 3/8
(FEP)
Suction side 4 ×9
(PVC braided hose)
Relief Valve/Air Release 4 × 6 (soft PVC hose)
Max. allowable viscosity 50 mPa•s
Allowable temperature Ambient temperature: 0 to 40 ºC / Transferring liquid: 0 to 40 ºC (no freezing allowed)
Environmental protection IEC standard: IP65 or equivalent (water- and dust-proof)
Operation mode Manual Setting stroke speed (15 to 300 strokes/min),w/ manual dial
Power supply Rated voltage AC100 to 240V (±10%)
No.of phases/Frequency 1-phase / 50 or 60 Hz
Maximum current 2.2A
Power consumption Max.:220VA/Ave.:16W
Weight 1.7kg
Note:
  1. Conditions: Clean water, room temperature
  2. Though the max. discharge pressure of the 30R models is 1.0 MPa, the Relief Valve operates when 0.7 MPa is exceeded. In applications requiring a discharge pressure of 0.7 MPa or more, ask for a model w/out the Relief Valve, and install a separate relief valve for extra safety.
  3. Though the max. discharge pressure of the 60R models is 0.8 MPa, the Relief Valve operates when 0.7 MPa is exceeded. In applications requiring a discharge pressure of 0.7 MPa or more, ask for a model w/out the Relief Valve, and install a separate relief valve for extra safety.

Ο Specification:PZ

Model
Specification
30 60 100
VTCE VTCF FTCE FTCF FTCT 6TCT VTCET
for injection
of boiler chemicals
VTCE VTCF FTCE FTCF FTCT 6TCT VTCE VTCF FTCE FTCF FTCT 6TCT
Max. discharge volume * mL/min 30 27 28 60 55 100 95
L/h 1.8 1.6 1.68 3.6 3.3 6.0 5.7
Max. discharge pressure * MPa 1.0 0.5 1.5 0.8 0.5 0.4
Stroke speed 15 to 300 strokes/min (dial setting)
Stroke length Fixed at 1.0 mm
Connection
(hose/tube: I.D × O.D)
Discharge side 4 × 9
(PVC braided hose)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(FEP)
1/4 × 3/8
(FEP)
6 × 8
(PTFE)
4 × 6
(nylon tube)
6 × 11
(PVC braided hose)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(FEP)
1/4 × 3/8
(FEP)
6 × 8
(PTFE)
6 × 11
(PVC braided hose)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(PE)
1/4 × 3/8
(PE)
6 × 8
(FEP)
1/4 × 3/8
(FEP)
6 × 8
(PTFE)
Suction side 4 × 9
(PVC braided hose)
Air Release 4 × 6 (soft PVC hose)
Max. allowable viscosity 50 mPa•s
Allowable temperature Ambient temperature: 0 to 40 ºC / Transferring liquid: 0 to 40 ºC (no freezing allowed)
Environmental protection IEC standard: IP65 or equivalent (water- and dust-proof)
Operation mode Manual Setting stroke speed (15 to 300 strokes/min), w/ manual dial
Power supply Rated voltage AC100 to 240V(±10%)
No.of phases/Frequency 1-phase / 50 or 60 Hz
Maximum current 2.2A
Power consumption Max.:220VA/Ave.:16W
Weight 1.7kg
* Conditions: Clean water, room temperature

Ο Liquid-end Material

Model
Specification
VTCE VTCF FTCE FTCF FTCT VTCET
(for injection of boiler chemicals)
6TCT
Pump head PVC PVDF PVC SUS316
Diaphragm PTFE
Check ball Ceramic
O-ring EPDM Fluoro-rubber EPDM Fluoro-rubber Special fluoro-rubber Pafulo®* EPDM PTFE
Valve seat EPDM Special fluoro-rubber EPDM Special fluoro-rubber PTFE PTFE -
Joint PVC PVDF PVC SUS316
Ball stopper PVC PVDF PTFE (valve stopper) PVC PTFE (valve stopper)
* PTFE for L-size(300/500)

Ο Model Code * Not all model combinations are possible. When selecting the pump model, first check "Specification" and "Liquid-end Material".

PZ - 30R - VTCE - 4x9PVC - W - S - JPL
    [1]   [2]   [3]   [4]   [5]   [6]
[2] Model (discharge volume standard)
[for injection of general chemicals]
    30R
60R
100R
30
60
100
: 30mL/min (w/ Relief Valve)
: 60mL/min (w/ Relief Valve)
:100mL/min (w/ Relief Valve)
: 30mL/min
: 60mL/min
:100mL/min
    [for injection of boiler chemicals]
    30R
30
: 30mL/min (w/ Relief Valve)
: 30mL/min
  Liquid-end material
[for injection of general chemicals]
    VTCE
VTCF
FTCE
FTCF
FTCT
6TCT
 
  [for injection of boiler chemicals]
    VTCET  
[3] Hose standard (size/material)
[for injection of gemeral chemicals]
    4 × 9
6 × 11
6 × 8
1/4 × 3/8
PVC
PVC
PE/FEP/PTFE
PE/FEP
  [for injection of boiler chemicals]
    4 × 6 PA
[4] Joint specification
    W
BW
: Standard
: Bolier
[5] Applicable standard
    S
CE
: Standard
: CE marking-compatible
[6] Power plug
    EUP
ULP
AUP
UKP
JPL
: Euro plug
: UL plug
: Australia plug
: UK plug
: Japan lead wire
Copyright © 2004 - 2010 C.M.P. Products Co.,Ltd. All rights reserved.