C.M.P. Group > 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Pump
Metering Pump > ZM

TACMINA::Products//Hydraulic Diaphragm (ZM model)
Hydraulic Diaphragm (ZM model)

TACMINA Proposes a New Standard in Metering Pumps

TACMINA has pooled together its resources in metering injection technology and presents a new liquid solution for addressing Pump head users' needs around the world


What is the "solenoid drive system?"
Magnetic force is generated on the solenoid coil by the power circuit built into the electronic circuitry to push out the diaphragm. As each single shaft advance and retraction operation can be controlled, this means that the flow rate can be controlled to higher precision.
<Features>
  • High discharge precision
  • Site-independent durability
  • Usable on general-purpose flange motors
  • Extensive range meets a wide range of injection needs.
  • Simple design allows easy maintenance
  • Logical design and improved economy


<Applications>
  • For metering injection in water treatment/waste water treatment chemicals
  • For sites requiring corrosion resistance and durability
  • For sites where fluid leaks are not allowed and high precision is required

Ο Liquid end materials(M/MW common)

Material
Name of part
PVC Stainless
Steel
VTCF STST
Pump head PVC SUS304
Diaphragm PTFE PTFE
Check ball Ceramic SUS304
O-ring Fluoro-rubber PTFE
Joint PVC SUS304

Ο Performance Specifications (ZM/ZMW common)

Model
Item
ZM1
-028 -028P -040 -040P -056 -056P
Max. discharge
volume (L/min)
50Hz 0.67 0.67 1.37 1.37 2.7 2.7
60Hz 0.80 0.80 1.65 1.65 3.2 3.2
Max. discharge
pressure (MPa)
VTCF 1.0 - 1.0 - 1.0 -
STST 1.6 2.5 1.6 2.5 1.2 1.7
Strokes per
minute (spm)
50Hz 81 81 81 81 81 81
60Hz 97 97 97 97 97 97
Stroke length (mm) 15 15 15 15 15 15
Connection
type/aperture
(flange type)
Discharge
side
VTCF JIS10K15A - JIS10K15A - JIS10K20A -
STST JIS16K15A JIS30K15A JIS16K15A JIS30K15A JIS16K15A JIS30K20A
Suction
side
VTCF JIS10K15A - JIS10K15A - JIS10K20A -
STST JIS16K15A JIS16K15A JIS16K15A JIS16K15A JIS16K20A JIS16K20A
Transferrable temperature Pump head material: SUS316, 0 to 80 ºC, PVC, 0 to 40 ºC No freezing allowed
Transferrable viscosity 50 MPa•s or less
Standard motor Power (V)
/frequency (Hz)
/number of poles (P)
3-phase, 200 V/50 Hz, 200 V/60 Hz, 220 V/60 Hz, totally enclosed fan-cooled
outdoor type (vertical flange installation)/4 poles
Output (kW) 0.4 0.4 0.4 0.4 0.4 0.75
Rated current
value/startup
current value (A)
200 V/50 Hz 2.3/10.2 2.3/10.2 2.3/10.2 2.3/10.2 2.3/10.2 3.6/19.5
200 V/60 Hz 2/9.07 2/9.07 2/9.07 2/9.07 2/9.07 3.2/17.4
220 V/60 Hz 2/9.98 2/9.98 2/9.98 2/9.98 2/9.98 3.1/19.4
Pump paint color Body: Fluoro-resin paint (Munsell 10B 5/10), Motor: Acrylic urethane resin paint (Munsell 10B 5/10)
Weight (kg) Motor-
integrated
type
VTCF 24 - 25 - 25 -
STST 30 31 30 31 30 43
Motorless
type
VTCF 14 - 15 - 15 -
STST 20 21 20 21 20 29
Copyright © 2004 - 2010 C.M.P. Products Co.,Ltd. All rights reserved.